diff --git a/alacritty/.config/alacritty/alacritty.yml b/alacritty/.config/alacritty/alacritty.yml
new file mode 100644
index 0000000..1f83afd
--- /dev/null
+++ b/alacritty/.config/alacritty/alacritty.yml
@@ -0,0 +1,63 @@
+font:
+  normal:
+    family: "MesloLGS NF"
+    style: Regular
+
+  bold:
+    family: "MesloLGS NF"
+    style: Bold
+
+  italic:
+    family: "MesloLGS NF"
+    style: Italic
+
+  bold_italic:
+    family: "MesloLGS NF"
+    style: Bold Italic
+
+  size: 12
+
+  offset:
+    x: 0
+    y: 0
+
+  glyph_offset:
+    x: 0
+    y: 0
+  
+  style: Regular
+  antialias: lcd  
+  use_thin_strokes: true
+
+#colors (Gruvbox dark)
+colors:
+  # Default colors
+  primary:
+     #hard contrast: background = '#1d2021'
+     background: '#282828'
+     # soft contrast: background = '#32302f'
+     foreground: '#ebdbb2'
+
+     # Normal colors
+  normal:
+       black:   '#282828'
+       red:     '#cc241d'
+       green:   '#98971a'
+       yellow:  '#d79921'
+       blue:    '#458588'
+       magenta: '#b16286'
+       cyan:    '#689d6a'
+       white:   '#a89984'
+       #white:   '#ffffff'
+
+     # Bright colors
+  bright:
+       black:   '#928374'
+       red:     '#fb4934'
+       green:   '#b8bb26'
+       yellow:  '#fabd2f'
+       blue:    '#83a598'
+       magenta: '#d3869b'
+       cyan:    '#8ec07c'
+       white:   '#ebdbb2'
+       #white:   '#ffffff'
diff --git a/mpd/.config/mpd/mpd.conf b/mpd/.config/mpd/mpd.conf
new file mode 100644
index 0000000..31f0518
--- /dev/null
+++ b/mpd/.config/mpd/mpd.conf
@@ -0,0 +1,415 @@
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory		"~/Music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+#playlist_directory		"~/.mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file			"~/.mpd/database"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog.
+#
+log_file			"~/.mpd/log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+#pid_file			"~/.mpd/pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+#state_file			"~/.mpd/state"
+#
+# The location of the sticker database.  This is a database which
+# manages dynamic information attached to songs.
+#
+#sticker_file			"~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+#user				"nobody"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group				"nogroup"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other than the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activiation is in use.
+#
+# For network
+#bind_to_address		"any"
+#
+# And for Unix Socket
+#bind_to_address		"~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port				"6600"
+#
+# Suppress all messages below the given threshold.  Use "verbose" for
+# troubleshooting. Available setting arguments are "notice", "info", "verbose",
+# "warning" and "error".
+#
+#log_level			"notice"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists	"no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This example just enables the "comment" tag without disabling all
+# the other supported tags:
+#metadata_to_use "+comment"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+auto_update	"yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself.  There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks	"yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks		"yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled		"yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network. %h will be replaced with the hostname.
+#
+#zeroconf_name			"Music Player @ %h"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password                        "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions             "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+# An example of a database section instead of the old 'db_file' setting.
+# It enables mounting other storages into the music directory.
+#
+#database {
+#       plugin "simple"
+#       path "~/.local/share/mpd/db
+#       cache_directory "~/.local/share/mpd/cache"
+#}
+#
+# An example of database config for a sattelite setup
+#
+#music_directory "nfs://fileserver.local/srv/mp3"
+#database {
+#       plugin "proxy"
+#       host "other.mpd.host"
+#       port "6600"
+#}
+
+# Input #######################################################################
+#
+input {
+        plugin "curl"
+#       proxy "proxy.isp.com:8080"
+#       proxy_user "user"
+#       proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+#	type		"alsa"
+#	name		"My ALSA Device"
+##	device		"hw:0,0"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"default"	# optional
+##	mixer_control	"PCM"		# optional
+##	mixer_index	"0"		# optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+#	type		"oss"
+#	name		"My OSS Device"
+##	device		"/dev/dsp"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"/dev/mixer"	# optional
+##	mixer_control	"PCM"		# optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+#	type		"shout"
+#	encoder		"vorbis"		# optional
+#	name		"My Shout Stream"
+#	host		"localhost"
+#	port		"8000"
+#	mount		"/mpd.ogg"
+#	password	"hackme"
+#	quality		"5.0"
+#	bitrate		"128"
+#	format		"44100:16:1"
+##	protocol	"icecast2"		# optional
+##	user		"source"		# optional
+##	description	"My Stream Description"	# optional
+##	url		"http://example.com"	# optional
+##	genre		"jazz"			# optional
+##	public		"no"			# optional
+##	timeout		"2"			# optional
+##	mixer_type      "software"		# optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+#	type		"recorder"
+#	name		"My recorder"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	path		"/var/lib/mpd/recorder/mpd.ogg"
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+#	type		"httpd"
+#	name		"My HTTP Stream"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	port		"8000"
+#	bind_to_address	"0.0.0.0"		# optional, IPv4 or IPv6
+##	quality		"5.0"			# do not define if bitrate is defined
+#	bitrate		"128"			# do not define if quality is defined
+#	format		"44100:16:1"
+#	max_clients	"0"			# optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+#	type		"pulse"
+#	name		"My Pulse Output"
+##	server		"remote_server"		# optional
+##	sink		"remote_server_sink"	# optional
+##	media_role	"media_role"		#optional
+#}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+#	type		"winmm"
+#	name		"My WinMM output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+##	mixer_type	"hardware"	# optional
+#}
+#
+# An example of a wasapi output (Windows multimedia API).
+#
+#audio_output {
+#	type		"wasapi"
+#	name		"My WASAPI output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+## Exclusive mode blocks all other audio source, and get best audio quality without resampling.
+##	exclusive	"no"		# optional
+## Enumerate all devices in log.
+##	enumerate	"no"		# optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+#	type		"openal"
+#	name		"My OpenAL output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+#	type		"sndio"
+#	name		"sndio output"
+#	mixer_type	"hardware"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+#	type		"osx"
+#	name		"My OS X Device"
+##	device		"Built-in Output"	# optional
+##	channel_map      "-1,-1,0,1"	# optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+#	type		"pipe"
+#	name		"my pipe"
+#	command		"aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+#	command		"nc example.org 8765"
+#	format		"44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+#	type		"null"
+#	name		"My Null Output"
+#	mixer_type      "none"			# optional
+#}
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <https://wiki.hydrogenaud.io/index.php?title=Replaygain> for
+# more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain			"album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp		"0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp	"0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit		"yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization		"no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset		"UTF-8"
+#
+###############################################################################
diff --git a/ncmpcpp/.config/ncmpcpp/config b/ncmpcpp/.config/ncmpcpp/config
new file mode 100644
index 0000000..207a6dc
--- /dev/null
+++ b/ncmpcpp/.config/ncmpcpp/config
@@ -0,0 +1,598 @@
+##############################################################
+## This is an example configuration file. Copy it to        ##
+## $XDG_CONFIG_HOME/ncmpcpp/config or $HOME/.ncmpcpp/config ##
+## and set up your preferences.                             ##
+##############################################################
+#
+##### directories ######
+##
+## Directory for storing ncmpcpp related files.  Changing it is useful if you
+## want to store everything somewhere else and provide command line setting for
+## alternative location to config file which defines that while launching
+## ncmpcpp.
+##
+#
+ncmpcpp_directory = ~/.config/ncmpcpp
+#
+##
+## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
+## MPD clients (eg. ncmpc) also use that location.
+##
+#
+#lyrics_directory = ~/.lyrics
+#
+##### connection settings #####
+#
+mpd_host = localhost
+#
+mpd_port = 6600
+#
+#mpd_connection_timeout = 5
+#
+## Needed for tag editor and file operations to work.
+##
+mpd_music_dir = ~/Music
+#
+#mpd_crossfade_time = 5
+#
+# Exclude pattern for random song action
+# http://www.boost.org/doc/libs/1_46_1/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html
+#random_exclude_pattern = "^(temp|midi_songs).*"
+#
+##### music visualizer #####
+##
+## In order to make music visualizer work with MPD you need to use the fifo
+## output. Its format parameter has to be set to 44100:16:1 for mono
+## visualization or 44100:16:2 for stereo visualization. As an example here is
+## the relevant section for mpd.conf:
+##
+ audio_output {
+        type            "fifo"
+        name            "Visualizer feed"
+        path            "/tmp/mpd.fifo"
+        format          "44100:16:2"
+ }
+##
+## If the visualization on occasion diverges from the audio output, please set
+## 'buffer_time' parameter of your audio output in mpd.conf to '100000' (100ms)
+## or less to prevent that from happening.
+##
+## Note: If you're using Mopidy, an address of a udpsink gstreamer's output is
+## also accepted. For example, the following section in mopidy.conf:
+##
+## [audio]
+## output = tee name=t ! queue ! autoaudiosink t.
+##        ! queue ! audio/x-raw,rate=44100,channels=2,format=S16LE
+##        ! udpsink host=localhost port=5555
+##
+## will make localhost:5555 available as a source of data for the stereo
+## visualizer.
+##
+#
+visualizer_data_source = /tmp/mpd.fifo
+#
+##
+## Note: Below parameter is needed for ncmpcpp to determine which output
+## provides data for visualizer and reset it at the beginning of visualization
+## to synchronize with audio.
+##
+#
+#visualizer_output_name = Visualizer feed
+#
+##
+## If you set format to 44100:16:2, make it 'yes'.
+##
+#visualizer_in_stereo = yes
+#
+##
+## Note: set below to >=10 only if you have synchronization issues with
+## visualization and audio.
+##
+#
+#visualizer_sync_interval = 0
+#
+##
+## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
+## with fftw3 support.
+##
+#
+## Available values: spectrum, wave, wave_filled, ellipse.
+##
+#visualizer_type = spectrum
+#
+#visualizer_fps = 60
+#
+#visualizer_autoscale = no
+#
+visualizer_look = ●▮
+#
+#visualizer_color = blue, cyan, green, yellow, magenta, red
+#
+## Alternative subset of 256 colors for terminals that support it.
+##
+#visualizer_color = 47, 83, 119, 155, 191, 227, 221, 215, 209, 203, 197, 161
+#
+##
+## Note: The next few visualization options apply to the spectrum visualizer.
+##
+#
+## Use unicode block characters for a smoother, more continuous look.
+## This will override the visualizer_look option. With transparent terminals
+## and visualizer_in_stereo set, artifacts may be visible on the bottom half of
+## the visualization.
+#
+#visualizer_spectrum_smooth_look = yes
+#
+## A value between 1 and 5 inclusive. Specifying a larger value makes the
+## visualizer look at a larger slice of time, which results in less jumpy
+## visualizer output.
+#
+#visualizer_spectrum_dft_size = 2
+#
+#visualizer_spectrum_gain = 10
+#
+## Left-most frequency of visualizer in Hz, must be less than HZ MAX
+#
+#visualizer_spectrum_hz_min = 20
+#
+## Right-most frequency of visualizer in Hz, must be greater than HZ MIN
+#
+#visualizer_spectrum_hz_max = 20000
+#
+##### system encoding #####
+##
+## ncmpcpp should detect your charset encoding but if it failed to do so, you
+## can specify charset encoding you are using here.
+##
+## Note: You can see whether your ncmpcpp build supports charset detection by
+## checking output of `ncmpcpp --version`.
+##
+## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
+## if your encoding is different.
+##
+#
+#system_encoding = ""
+#
+##### delays #####
+#
+## Time of inactivity (in seconds) after playlist highlighting will be disabled
+## (0 = always on).
+##
+#playlist_disable_highlight_delay = 5
+#
+## Defines how long messages are supposed to be visible.
+##
+#message_delay_time = 5
+#
+##### song format #####
+##
+## For a song format you can use:
+##
+## %l - length
+## %f - filename
+## %D - directory
+## %a - artist
+## %A - album artist
+## %t - title
+## %b - album
+## %y - date
+## %n - track number (01/12 -> 01)
+## %N - full track info (01/12 -> 01/12)
+## %g - genre
+## %c - composer
+## %p - performer
+## %d - disc
+## %C - comment
+## %P - priority
+## $R - begin right alignment
+##
+## If you want to make sure that a part of the format is displayed only when
+## certain tags are present, you can archieve it by grouping them with brackets,
+## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
+## present or '' otherwise.  It is also possible to define a list of
+## alternatives by providing several groups and separating them with '|',
+## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
+## not present.
+##
+## Note: If you want to set limit on maximal length of a tag, just put the
+## appropriate number between % and character that defines tag type, e.g. to
+## make album take max. 20 terminal cells, use '%20b'.
+##
+## In addition, formats support markers used for text attributes.  They are
+## followed by character '$'. After that you can put:
+##
+## - 0 - default window color (discards all other colors)
+## - 1 - black
+## - 2 - red
+## - 3 - green
+## - 4 - yellow
+## - 5 - blue
+## - 6 - magenta
+## - 7 - cyan
+## - 8 - white
+## - 9 - end of current color
+## - b - bold text
+## - u - underline text
+## - r - reverse colors
+## - a - use alternative character set
+##
+## If you don't want to use a non-color attribute anymore, just put it again,
+## but this time insert character '/' between '$' and attribute character,
+## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
+## reversed colors.
+##
+## If you want to use 256 colors and/or background colors in formats (the naming
+## scheme is described below in section about color definitions), it can be done
+## with the syntax $(COLOR), e.g. to set the artist tag to one of the
+## non-standard colors and make it have yellow background, you need to write
+## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
+## with attributes listed above.
+##
+## Note: colors can be nested.
+##
+#
+#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3%l$9}
+#
+#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
+#
+#song_library_format = {%n - }{%t}|{%f}
+#
+#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
+#
+#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
+#
+#current_item_prefix = $(yellow)$r
+#
+#current_item_suffix = $/r$(end)
+#
+#current_item_inactive_column_prefix = $(white)$r
+#
+#current_item_inactive_column_suffix = $/r$(end)
+#
+#now_playing_prefix = $b
+#
+#now_playing_suffix = $/b
+#
+#browser_playlist_prefix = "$2playlist$9 "
+#
+#selected_item_prefix = $6
+#
+#selected_item_suffix = $9
+#
+#modified_item_prefix = $3> $9
+#
+##
+## Note: attributes are not supported for the following variables.
+##
+#song_window_title_format = {%a - }{%t}|{%f}
+##
+## Note: Below variables are used for sorting songs in browser.  The sort mode
+## determines how songs are sorted, and can be used in combination with a sort
+## format to specify a custom sorting format.  Available values for
+## browser_sort_mode are "type", "name", "mtime", "format" and "none".
+##
+#
+#browser_sort_mode = type
+#
+#browser_sort_format = {%a - }{%t}|{%f} {%l}
+#
+##### columns settings #####
+##
+## syntax of song columns list format is "column column etc."
+##
+## - syntax for each column is:
+##
+## (width of the column)[color of the column]{displayed tag}
+##
+## Note: Width is by default in %, if you want a column to have fixed size, add
+## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
+## screen (so the real width will depend on actual screen size), whereas
+## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
+## is.
+##
+## - color is optional (if you want the default one, leave the field empty).
+##
+## Note: You can give a column additional attributes by putting appropriate
+## character after displayed tag character. Available attributes are:
+##
+## - r - column will be right aligned
+## - E - if tag is empty, empty tag marker won't be displayed
+##
+## You can also:
+##
+## - give a column custom name by putting it after attributes, separated with
+##   character ':', e.g. {lr:Length} gives you right aligned column of lengths
+##   named "Length".
+##
+## - define sequence of tags, that have to be displayed in case predecessor is
+##   empty in a way similar to the one in classic song format, i.e. using '|'
+##   character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
+##   display artist tag and then composer and performer if previous ones are not
+##   available.
+##
+#
+#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
+#
+##### various settings #####
+#
+##
+## Note: Custom command that will be executed each time song changes. Useful for
+## notifications etc.
+##
+#execute_on_song_change = ""
+#
+##
+## Note: Custom command that will be executed each time player state
+## changes. The environment variable MPD_PLAYER_STATE is set to the current
+## state (either unknown, play, pause, or stop) for its duration.
+##
+#
+#execute_on_player_state_change = ""
+#
+#playlist_show_mpd_host = no
+#
+#playlist_show_remaining_time = no
+#
+#playlist_shorten_total_times = no
+#
+#playlist_separate_albums = no
+#
+##
+## Note: Possible display modes: classic, columns.
+##
+#playlist_display_mode = columns
+#
+#browser_display_mode = classic
+#
+#search_engine_display_mode = classic
+#
+#playlist_editor_display_mode = classic
+#
+#discard_colors_if_item_is_selected = yes
+#
+#show_duplicate_tags = yes
+#
+#incremental_seeking = yes
+#
+#seek_time = 1
+#
+#volume_change_step = 2
+#
+#autocenter_mode = no
+#
+#centered_cursor = no
+#
+##
+## Note: You can specify third character which will be used to build 'empty'
+## part of progressbar.
+##
+#progressbar_look = =>
+#
+## Available values: database, playlist.
+##
+#default_place_to_search_in = database
+#
+## Available values: classic, alternative.
+##
+#user_interface = classic
+#
+#data_fetching_delay = yes
+#
+## Available values: artist, album_artist, date, genre, composer, performer.
+##
+#media_library_primary_tag = artist
+#
+#media_library_albums_split_by_date = yes
+#
+#media_library_hide_album_dates = no
+#
+## Available values: wrapped, normal.
+##
+#default_find_mode = wrapped
+#
+#default_tag_editor_pattern = %n - %t
+#
+#header_visibility = yes
+#
+#statusbar_visibility = yes
+#
+## Show the "Connected to ..." message on startup
+#connected_message_on_startup = yes
+#
+#titles_visibility = yes
+#
+#header_text_scrolling = yes
+#
+#cyclic_scrolling = no
+#
+#lyrics_fetchers = azlyrics, genius, musixmatch, sing365, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, zeneszoveg, internet
+#
+#follow_now_playing_lyrics = no
+#
+#fetch_lyrics_for_current_song_in_background = no
+#
+#store_lyrics_in_song_dir = no
+#
+#generate_win32_compatible_filenames = yes
+#
+#allow_for_physical_item_deletion = no
+#
+##
+## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
+## language you set and if it fails, it will fall back to english. Otherwise it
+## will use english the first time.
+##
+## Note: Language has to be expressed as an ISO 639 alpha-2 code.
+##
+#lastfm_preferred_language = en
+#
+#space_add_mode = add_remove
+#
+#show_hidden_files_in_local_browser = no
+#
+##
+## How shall screen switcher work?
+##
+## - "previous" - switch between the current and previous screen.
+## - "screen1,...,screenN" - switch between given sequence of screens.
+##
+## Screens available for use: help, playlist, browser, search_engine,
+## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
+## lyrics, last_fm.
+##
+#screen_switcher_mode = playlist, browser
+#
+##
+## Note: You can define startup screen by choosing screen from the list above.
+##
+#startup_screen = playlist
+#
+##
+## Note: You can define startup slave screen by choosing screen from the list
+## above or an empty value for no slave screen.
+##
+#startup_slave_screen = ""
+#
+#startup_slave_screen_focus = no
+#
+##
+## Default width of locked screen (in %).  Acceptable values are from 20 to 80.
+##
+#
+#locked_screen_width_part = 50
+#
+#ask_for_locked_screen_width_part = yes
+#
+#jump_to_now_playing_song_at_start = yes
+#
+#ask_before_clearing_playlists = yes
+#
+#clock_display_seconds = no
+#
+#display_volume_level = yes
+#
+#display_bitrate = no
+#
+#display_remaining_time = no
+#
+## Available values: none, basic, extended, perl.
+##
+#regular_expressions = perl
+#
+##
+## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
+## sorting items in browser, tags in media library, etc.
+##
+#ignore_leading_the = no
+#
+##
+## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
+## filtering lists. This takes an effect only if boost was compiled with ICU
+## support.
+##
+#ignore_diacritics = no
+#
+#block_search_constraints_change_if_items_found = yes
+#
+#mouse_support = yes
+#
+#mouse_list_scroll_whole_page = no
+#
+#lines_scrolled = 5
+#
+#empty_tag_marker = <empty>
+#
+#tags_separator = " | "
+#
+#tag_editor_extended_numeration = no
+#
+#media_library_sort_by_mtime = no
+#
+#enable_window_title = yes
+#
+##
+## Note: You can choose default search mode for search engine. Available modes
+## are:
+##
+## - 1 - use mpd built-in searching (no regexes, pattern matching)
+##
+## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
+##       if your mpd is on a remote machine, downloading big database to process
+##       it can take a while
+##
+## - 3 - match only exact values (this mode uses mpd function for searching in
+##       database and local one for searching in current playlist)
+##
+#
+#search_engine_default_search_mode = 1
+#
+#external_editor = nano
+#
+## Note: set to yes if external editor is a console application.
+##
+#use_console_editor = yes
+#
+##### colors definitions #####
+##
+## It is possible to set a background color by setting a color value
+## "<foreground>_<background>", e.g. red_black will set foregound color to red
+## and background color to black.
+##
+## In addition, for terminals that support 256 colors it is possible to set one
+## of them by using a number in range [1, 256] instead of color name,
+## e.g. numerical value corresponding to red_black is 2_1. To find out if the
+## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
+## help screen for list of available colors and their numerical values.
+##
+## What is more, there are two special values for the background color:
+## "transparent" and "current". The first one explicitly sets the background to
+## be transparent, while the second one allows you to preserve current
+## background color and change only the foreground one. It's used implicitly
+## when background color is not specified.
+##
+## Moreover, it is possible to attach format information to selected color
+## variables by appending to their end a colon followed by one or more format
+## flags, e.g. black:b or red:ur. The following variables support this syntax:
+## visualizer_color, color1, color2, empty_tag_color, volume_color,
+## state_line_color, state_flags_color, progressbar_color,
+## progressbar_elapsed_color, player_state_color, statusbar_time_color,
+## alternative_ui_separator_color.
+##
+## Note: due to technical limitations of older ncurses version, if 256 colors
+## are used there is a possibility that you'll be able to use only colors with
+## transparent background.
+#
+#colors_enabled = yes
+#
+#empty_tag_color = cyan
+#
+#header_window_color = default
+#
+#volume_color = default
+#
+#state_line_color = default
+#
+#state_flags_color = default:b
+#
+#main_window_color = yellow
+#
+#color1 = white
+#
+#color2 = green
+#
+#progressbar_color = black:b
+#
+#progressbar_elapsed_color = green:b
+#
+#statusbar_color = default
+#
+#statusbar_time_color = default:b
+#
+#player_state_color = default:b
+#
+#alternative_ui_separator_color = black:b
+#
+#window_border_color = green
+#
+#active_window_border = red
+#
diff --git a/vim/.vim/bundle/ctrlp.vim b/vim/.vim/bundle/ctrlp.vim
new file mode 160000
index 0000000..4b9e7ca
--- /dev/null
+++ b/vim/.vim/bundle/ctrlp.vim
@@ -0,0 +1 @@
+Subproject commit 4b9e7cac612902a25498cca49f13475fe1a821a4
diff --git a/vim/.vimrc b/vim/.vimrc
new file mode 100644
index 0000000..35482a3
--- /dev/null
+++ b/vim/.vimrc
@@ -0,0 +1,71 @@
+set runtimepath^=~/.vim/bundle/ctrlp.vim
+set runtimepath^=~/.vim/bundle/nerdtree
+set nocompatible
+set relativenumber
+syntax on
+filetype plugin on
+set tabstop=4 shiftwidth=4 expandtab
+set number
+set hlsearch
+
+" finding files
+set path+=**
+set wildmenu
+
+" tags
+command! MakeTags !ctags -R .
+
+" linter
+autocmd FileType python setlocal makeprg=pylint\ --output-format=parseable
+autocmd BufWritePost *.py silent make! <afile> | silent redraw!
+autocmd QuickFixCmdPost [^l]* cwindow
+
+" file browsing
+let g:netrw_banner=0
+let g:netrw_browse_split=4
+let g:netrw_altv=1
+let g:netrw_liststyle=3
+let g:netrw_list_hide=netrw_gitignore#Hide()
+let g:netrw_list_hide.=',\(\^\|\s\s\)\zs\.\S\+'
+
+" cursorline
+set cursorline 
+hi CursorLine  cterm=NONE ctermbg=darkgrey ctermfg=white
+
+" statusline
+function! GitBranch()
+  return system("git rev-parse --abbrev-ref HEAD 2>/dev/null | tr -d '\n'")
+endfunction
+
+function! StatuslineGit()
+  let l:branchname = GitBranch()
+  return strlen(l:branchname) > 0?'  '.l:branchname.' ':''
+endfunction
+
+set laststatus=2
+set statusline=
+set statusline+=%#PmenuSel#
+set statusline+=%{StatuslineGit()}
+set statusline+=%#BufTabLineCurrent#
+set statusline+=\ %M
+set statusline+=\ %r
+set statusline+=\ %F
+set statusline+=%= "Right side settings
+set statusline+=\ %y
+set statusline+=%#CursorColumn#
+set statusline+=\ %{&fileencoding?&fileencoding:&encoding}
+set statusline+=\[%{&fileformat}\]
+set statusline+=\ %c:%l/%L
+set statusline+=\ %p%%
+set statusline+=\ [%n]
+
+
+"map <C-n> :NERDTreeToggle<CR>
+map <C-n>  :Lex <bar> vertical resize 30 <CR>
+
+let g:vimspector_enable_mappings = 'HUMAN'
+packadd! vimspector
+
+"packadd! gruvbox
+colorscheme gruvbox
+set bg=dark